Drunkin Solar
New Member
Have some questions on re-configuring my setup. Paging @sunshine_eggo if available.
I Just recently did all the firmware updates to my system. The system consists of a MultiPlus 24v 3000w, Smart Solar 250/100 and a Cerbo S.
After the updates finished the system SOC disappeared. Prior to the updates SOC worked flawlessly. I remember when doing the initial config last year I was able to set the MultiPlus as the device to calculate SOC. As of now that setting eludes me using Remote Console. I have noticed some changes in the configs from what they were last year.
Am I missing something or do I need to run Remote VEConfigure to find the correct setting?
One other issue I was never able to set for VRM is temp being reported in C instead F. Still no joy there.
All help is appreciated. Thanks All
I Just recently did all the firmware updates to my system. The system consists of a MultiPlus 24v 3000w, Smart Solar 250/100 and a Cerbo S.
After the updates finished the system SOC disappeared. Prior to the updates SOC worked flawlessly. I remember when doing the initial config last year I was able to set the MultiPlus as the device to calculate SOC. As of now that setting eludes me using Remote Console. I have noticed some changes in the configs from what they were last year.
Am I missing something or do I need to run Remote VEConfigure to find the correct setting?
One other issue I was never able to set for VRM is temp being reported in C instead F. Still no joy there.
All help is appreciated. Thanks All