Hi all,
First of all here is my system:
-48 volt
-28kwh using Nissan leaf batteries
-Epever 80amp mppt charge controller
-AMS 5000 watt, 10000 watt peak, 30amp ac inverter.
I used a 10awg, 100ft super heavy duty extension cord to plug in my 1hp, 110/12amp, 220/6 amp water pump. I checked and the pump was getting about 121 volt from the cord but it just couldnt get up to 65 psi I had set. Plug into my house with the same voltage, no problem getting up to that pressure. I even get a 220v transformer, rewire my water pump for 220v and get 243 at the pump, that didn't work either. Any suggestions would be really appreciated.
First of all here is my system:
-48 volt
-28kwh using Nissan leaf batteries
-Epever 80amp mppt charge controller
-AMS 5000 watt, 10000 watt peak, 30amp ac inverter.
I used a 10awg, 100ft super heavy duty extension cord to plug in my 1hp, 110/12amp, 220/6 amp water pump. I checked and the pump was getting about 121 volt from the cord but it just couldnt get up to 65 psi I had set. Plug into my house with the same voltage, no problem getting up to that pressure. I even get a 220v transformer, rewire my water pump for 220v and get 243 at the pump, that didn't work either. Any suggestions would be really appreciated.