So I've been shopping for a Charge Controller for a little while now. I'd like to end up with all Victron components so that I can use the GX Touch Display. Now I was planning on doing the 150/70 VE.Can Charge Controller but some of the wording on the webpage threw me off. It says "The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model." Does this mean that the array has to be configured to 150V or is it a maximum value. I currently only have some portable (300w) 12v (14.4V) panels and was hoping to configure them in series for better efficiency. Obviously that would only be about 28V so it wouldn't be anywhere near the 150V but eventually I would be using the controller in my camper with many more panels permanently mounted to the roof.