My batteries require to be charged at 42amps for the bulk stage (interstate 6v 420ah L16 x2). I currently have a 40amp MPPT epever.
Currently I have a dc fridge and an inverter connected to the system which pulls about 7 to 8 amps during the time the fridge compressor runs (runs about 30 minutes per hour). When the compressor is off my inverter standby and trailer pulls about 1 to 2 amps depending if it’s just on standby or if items are drawing some power.
wouldn’t it be a better idea for me to have a 50amp charge controller? Minimum amps drawn currently is 42a + 1a amp half the time and the other half 42a + 7a. The 40a scc is t even enough to meet the 42a the battery should be getting.
Currently I have a dc fridge and an inverter connected to the system which pulls about 7 to 8 amps during the time the fridge compressor runs (runs about 30 minutes per hour). When the compressor is off my inverter standby and trailer pulls about 1 to 2 amps depending if it’s just on standby or if items are drawing some power.
wouldn’t it be a better idea for me to have a 50amp charge controller? Minimum amps drawn currently is 42a + 1a amp half the time and the other half 42a + 7a. The 40a scc is t even enough to meet the 42a the battery should be getting.