Vanhandler
New Member
- Joined
- May 10, 2021
- Messages
- 18
Newbie here and need some help choosing a bms and determining if there are any other components needed.
Currently I am awaiting 12 Eve 280AH (3.2) Grade A cells which should be arriving in the next 2-4 weeks.
I am planning to configure them in a 3P4S configuration and I am trying to determine what is the best option for a BMS that would communicate with my Victron gear. I was looking at the REC SI BMS. Would one of these units work with the configuration I am planning?
I am running a 12v system (Solar, shore power, and alternator) with the following components:
5 X 100 Watt Renogy Mono Panels (in series)
100/30 Victron Solar Controller
12 12 - 30 Victron Orion-Tr Smart DC-DC Charger
3000 Watt Victron Charger Inverter
Victron Lynx Distributor
ACDC Combined Fuse box
Victron BMV-712 Smart Battery Monitor
I am thinking I will need a Cerbo GX and GX Touch as well?
Thanks in advance.
Currently I am awaiting 12 Eve 280AH (3.2) Grade A cells which should be arriving in the next 2-4 weeks.
I am planning to configure them in a 3P4S configuration and I am trying to determine what is the best option for a BMS that would communicate with my Victron gear. I was looking at the REC SI BMS. Would one of these units work with the configuration I am planning?
I am running a 12v system (Solar, shore power, and alternator) with the following components:
5 X 100 Watt Renogy Mono Panels (in series)
100/30 Victron Solar Controller
12 12 - 30 Victron Orion-Tr Smart DC-DC Charger
3000 Watt Victron Charger Inverter
Victron Lynx Distributor
ACDC Combined Fuse box
Victron BMV-712 Smart Battery Monitor
I am thinking I will need a Cerbo GX and GX Touch as well?
Thanks in advance.