diy solar

diy solar

Mpp solar inverter will not read power from solar panels.

Ibmathews

New Member
Joined
Jan 26, 2020
Messages
1
I recently installed the 24v mpp solar all in one inverter. I have 2 12v batteries and 2 24v 270 watt solar panels connected to it. I an getting a reading of 34v off of the panels (it's a cloudy day) but the inverter acts as if there are no panels connected. It is showing 0 pv power coming in. Any ideas?
 
I recently installed the 24v mpp solar all in one inverter. I have 2 12v batteries and 2 24v 270 watt solar panels connected to it. I an getting a reading of 34v off of the panels (it's a cloudy day) but the inverter acts as if there are no panels connected. It is showing 0 pv power coming in. Any ideas?

Check that you dont have your positive and negative switched
 
Once you have hit float, the mpp pip unit will not draw power from the pv unless there is a load running.
 
Back
Top