Hello all.
My first post so here goes. I built a small test system to try and learn. I have an 12V 3500W EDECOA Pure Sine Wave Power Inverter powered by a bank of six
Renogy 12 Volt Solar Panel 100 Watt High-Efficiency Monocrystalline Modules. They are running through a
Epever MPPT Solar Charge Controller 20A 150V PV to a bank of six Everstart 27DC 80 Amp Hour deep cycle batteries wired in parallel. I have 30 amp breakers between the charge controller and the battery bank. I have 100 amp breakers between the battery bank and Inverter. When I connect a 1500 Watt load the 100 amp breaker pops. I cannot find anything that shows the max amp draw allow for inverters. Do I need the 100 amp breakers?
Thanks in advance
My first post so here goes. I built a small test system to try and learn. I have an 12V 3500W EDECOA Pure Sine Wave Power Inverter powered by a bank of six
Renogy 12 Volt Solar Panel 100 Watt High-Efficiency Monocrystalline Modules. They are running through a
Epever MPPT Solar Charge Controller 20A 150V PV to a bank of six Everstart 27DC 80 Amp Hour deep cycle batteries wired in parallel. I have 30 amp breakers between the charge controller and the battery bank. I have 100 amp breakers between the battery bank and Inverter. When I connect a 1500 Watt load the 100 amp breaker pops. I cannot find anything that shows the max amp draw allow for inverters. Do I need the 100 amp breakers?
Thanks in advance