diy solar

diy solar

Is the Overkill UART USB module compatible with the JBD 200a BMS UART Port?

OTRwSolar

Solar Enthusiast
Joined
Apr 5, 2021
Messages
207
Does anyone know if the Overkill Solar JBD UART USB module is electrically compatible with the JBD 200a BMS UART port?

I've discovered they use different 4-pin connectors. The Overkill JBD UART USB module has 3 wires (black, red & white) that go to a 4-pin connector that I believe is a 4-pin JST (PH?) connector with 2.5mm spacing. The JBD 200a BMS UART port (which supports both USB & bluetooth) appears to use a 4-pin JST (PA?) connector with 2.0mm spacing. Can anyone confirm whether or not I've identified these connectors correctly? Thx.
 
Does anyone know if the Overkill Solar JBD UART USB module is electrically compatible with the JBD 200a BMS UART port?
Yes it is, if you replace the connector.

Can anyone confirm whether or not I've identified these connectors correctly?
Yes, you will have to replace the 4 pin JST-PH connector with a 4 pin JST-PA connector.
 
Back
Top