066logger's latest activity

Only $10 ~ $20k, huh? https://diysolarforum.com/threads/cost-for-utility-transformer-installation.54500/post-704886 Also look at...

I think I’m probably pretty far over the limits of what my system is capable of unfortunately. My bigger inverter is only a 6,000 watt...

If total wattage is within inverter limit, only starting is a problem, consider a 3-phase motor and VFD. It ramps up RPM slowly. Ideally...

Yeah 😞. I’ve definitely heard some mixed opinions on them… some seem to really get along good with them but some absolutely hate them. I...

That’s definitely a good thing to keep in mind! I’ll look into it. If nothing else it might help the inrush current more manageable for...

Oh good grief!! $150,000!!! That’s insanity. I was talking to one of the local business owners here who has a small engine shop and was...

My Trane 5 Ton central AC unit (5 hp motor) had an inrush of 162 Amps (measured it twice!), even the label showing "only" 144 LRA. After...

Just about everyone that I know of that tries a PTO generator ends up not liking it. They get in the way of your tractor being a tractor...

I would think so haha. I was surprised one 5hp motor can draw over 100amps on startup 😳.

16kw continuous and 40kw surge should handle quite a lot 😁

Ahahahaha oh I’m sure the wife would be thrilled with half the house filled with solar equipment 🙃 not to mention the million plus I’d...

Victron system could do it but the ROI might be awhile 😉 Found this video a while back, awesome system.

Yeah? 3phase is something I have 0 experience with lol. It runs right overhead my shop in town but my experience has been getting a...

Possibly, three phase motors tend to be very affordable. Overall cost and complexity you’re probably best going with the PTO generator...

I’ve definitely looked into them, the worst part is I’m not sure the negatives outweigh the positives in my use case. First off another...

Since your usage is only occasional I would suggest a good quality used diesel genset. Something in the 30kW+ range.

Will it work on 3 phase power? That would be the way to go, three inverters setup in three phase. Much more efficient. And DEFINITELY...

I think 3 phase would require different motors wouldn’t it? The little bit of research I did (as these machines are often 3phase and 3...

I’m thinking a dual powered shop will serve me best. A small 240v sub panel from my house for the everyday loads, lights, battery...

As this is just the first of many power-hungry tools that will accrete in your type of wood shop, I think I'd go with a hd shop power...