Pierre

40 amps is fine for a 280 cell.

No , with caveat.

My vocabulary has been expanded.

Mine too 😂

Victron is big in South Africa. They have regular training tours through the country and they get their official distributors to host...

What a lovely Dutch maiden !

99% + of the Amazon purchasers won’t have a problem with their Victron device.. I just take my chances and so far everything has worked...

At 13.52 v that is 100.96 Ah https://convert-formula.com/ah-wh

That doesn't say data is logged every second but I can understand the confusion and your frustration at it not meeting your...

Cells are factory tested to comply within the Working Voltage Range (3.000-3.400 V per cell). The allowable range that causes no harm...

float @ 3.35v/cell is my preference in accordance to everything I've read on the net over the last few years.

OP - maybe you can flatten the crimp portion , drill and fit a screw and nut and with a ring lug on the cable end , if space allows.

Yes looks perfectly exact.

I just want to be clear that this is a clone to new folks and others who otherwise might not know the difference.

People can buy what they want. I honestly didn’t even read the brand label in the first post. It’s the buyers risk or reward in how...

Cool What kind of adapter did you use to connect the gas canister to the PV input?

Sounds like you have done well here ! Remember that adding a LOT of turns through the toroid can increase the capacitance from one side...

Interesting thread. Thanks guys!

A quick story of a recent experience I had. Not active on HF but had a terrible spur on a local GMRS repeater at 462.625 mhz. It went...

This noise I believe is a 15Khz sweeping freq and it comes from the MPPTs. It is not a "Cheap" inverter thing, it happens with Sol-Arks...