Hedges

I don't think there is a reason to set GdRvPwr limit on reverse power to 5000W. I would set it to more like 80% of what the breaker...

Here is another 3-phase hybrid to consider. This doesn't get around all your red tape problems, but it is a tier-1 company, should avoid...

Downstream loads, or backfeed the house through a suicide cord? Somebody offered that before...

"They also receive special classes and observe how customers react when they stare at the goods" Uh, what "goods"?

@Hedges speaking of sunny islands. Someone just scored 20 new in box 6048s for 17k in Kentucky at auction today!

Getting back on topic now…….

You can if you allow grid voltage to rise high enough. Crude, indiscriminate as local voltages vary considerably, but it works. Better...

I thought you meant backfeed house wiring from battery when grid was down (would have required communication with a disconnect switch at...

230/400Y, less useful for US customers. 120/208Y could work for most of us. Use 2 legs for the house, have 3-phase for shop. Lots of...

Maybe use Solar Assistant to control Load Controllers. Turn on one at a time until export or import is +/- 1kWh. A 5Kw, two 2Kw, and a...

The only thing you can't curtail is rooftop PV. (to be curtailable in the future.) Of course, probably have to keep a certain...

SMA Sunny Island uses frequency shift to curtail production from Sunny Boy AC coupled PV inverters. At one time, SMA sold Smart Load...

The last kWh exported may have negative value, but the vast majority were put to use, avoiding combustion of fossil fuel. The total...

I note in recent days California's grid batteries have been discharging at 6+GW during the peak period and covering 25% or more of the...

Hybrid with same AC wattage rating, or limited to same. Higher efficiency/wattage panels in same footprint as old. The extra production...

honetly I would not have said jack nor shit to anyone... Nosy Neighbor AKA limp wristed male (we think) karen lookalike..."what you...

Utility will require UL-1741-SB or similar for backfeed. The older inverters are only UL-1741. If loads always exceed PV output, they...

Victron instructions say to match wire resistance precisely. I think the firmware is designed to make output "stiff" not sagging in...

Permanently connected, the 3% or whatever imbalance built into Victron auto-transformer would try to imbalance the grid. One of the...