ABarbarian's latest activity

My assessment is it is probably a small current being pushed by capacitance. I could understand the floating N-G might cause this in...

I did some voltage measurements, disconnected the neutral cable and left the line connected, switch off, between "neutral in" other...

I am not sure it is relevant, because the glow persists when inverter is set on bypass mode and there is no voltage difference between...

I was using an incorrect multimeter in my first set of readings, I think I fixed that. The probes were connected to try and read what...

Switch is a simple mechanical switch See attached picture, if positive line is broken the glow remains, I believe that eliminates the...

I think the attached pictures fix my measuring technique. When run in series on Neutral getting 0.058 mA When run in series on Line...

Just a quick reply: 115 V is Neutral to Ground, but no ground wire is coming into the lamp, roof is cement and conduit plastic so I am...

Only L and N wires, which makes me think it can't be current passing to Ground?

Attached are pictures of the LED and some wiring. The LED only has 2 wires coming in, Live and Neutral I re-tested things, pertinent...

See pics, yes when glowing there is 0.09 Amps passing through

- Thailand - Inverter: MPP 4kW PIP-4048MS Inverter is on an old firmware without option #38 (for allowing N-G bonding when in inverter...

But what about when on bypass the LED still glows? In that situation there is no V difference between N-G?

Thanks for all the replies, I will run some more tests and list out a more detailed post later, but in reply to this question (system is...

Thanks, I replied in the other post that it does not seem to be G-N bond because when on bypass a G-N bond exists but the glow remains...

Apologies, this is a duplicate post, I stepped away from the issue for a few months and forgot I had already posted at...

Thanks for the suggestion and sorry for the slow reply. When in inverter mode the AC out is floating, no N-G bond, difficult to fix at...

I have an inverter that has AC In connected to grid, used for grid backup. When inverter is in inverter mode (not bypass/grid) I read a...

Some LED lights in my house, when being charged from my solar inverter, maintain a ghosting glow (attached pic) when turned off. When...

Thank you for going into the specs and referencing the settings, that is very appreciated. I understand your answer to my main question...

1 14 cells