Recent content by Agmills

I also sold out my Growatt and went back to Schneider. Too many issues and def too much operating fan noise

Let’s work with one single unit.

Ok what have you set the charging voltages to in setting 19-21? Are you paralleling the two inverters or seperate systems?

I’m sure I can help but not understanding the full issue. Need some more info but it sounds like you are overcharging the batteries to an over voltage level which would shut them down as well as the inverter. Which Rosen battery do you have as in the model number? Is it 15c or 16c? Is it power...

I wouldn’t . It works fine . See my response below

I run growatt and Rosen batteries. Took about two weeks to settle down but I have all communication working well and everything is perfect except for the annoying transformer noise caused from it being an all in one. But they work great and I didn’t buy my Growatt from them. Bought it from...

Yea they are wrong. You are correct

Can the fans be changed to produce less noise from spf6000dvm?

Ok realized your all good now

Please don’t do that. Sorry just seeing this forum and it took me about two months to figure this out. As I said msg me when you can

I have the same setup. Link me

Question do you find your spf6000 fan very VERY noisy and constant reguardless of load? I’m running at average 650w even at night and the fans are really very noisy. I’m wondering if something is wrong or what? It may stop for about 2min at times or a min and then just start at full fan speed as...

Speaking about the idle consumption, do you guys know of an inverter that makes a lot less noise than the growatt transformer base inverters? I have a SPF6000DVM and it is LOUD.

Not really . My lifepo4 are 15 s so nominal is 3.4x15 which is 51 at highest. His is 3.4 which is. 48 at highest so charging at 57 is really ridiculous that why he will never see past 57v and 75% SOC . Figures are too high if it is really a 14s

Firstly , How do you get 57v with a 48 v 14s setup? That’s 57/14=4.07v per cell which should shut down the batteries passing 3.65v? Any way that said there doesn’t seem to be a rebulk feature on the growatt so I can only tell you what I do which is to use one of my Outback fm80’s with some...