diy solar

diy solar

Recent content by apple036

  1. A

    Bulk Charge Troubleshooting

    Thanks for the feedback. So, this system is in my van, which I live & work in. Is my best bang for buck here to order connectors & wire in parallel? And then also pull the batteries, get them fully charged. Other option I see would be getting a matching 3rd 150W panel (which is more...
  2. A

    Bulk Charge Troubleshooting

    It’s an EPEVER Tracer. Specs from user manual: Gel Over Voltage Disconnect Voltage 16.0V Charging Limit Voltage 15.0V Over Voltage Reconnect Voltage 15.0V Equalize Charging Voltage —— Boost Charging Voltage 14.2V Float Charging Voltage 13.8V Boost Reconnect Charging Voltage 13.2V Low Voltage...
  3. A

    Bulk Charge Troubleshooting

    They were discharged to around 50% while disconnected. I was thinking of doing that next, connecting them to a charger to make sure they can get to 14V. 150W: 17.0V/8.28A 100W: 16.77V/6.26A
  4. A

    Bulk Charge Troubleshooting

    Connected to is probably more appropriate. No battery monitor.
  5. A

    Bulk Charge Troubleshooting

    Background: 8 months without issues, 2x 150w panels & 1x 100w panel in series, 40a MPPT charge controller, down to 4x 100ah gel batteries in parallel. Was diagnosing why my battery isolator wasn’t working when I was driving, so I had disconnected batteries, etc, looking at voltages at various...
Back
Top