Most reacted threads

I have a small system as follows. Four 300-watt panels wired in parallel. 8-gauge solar wire with a 30-foot run Victron 150/70-amp controller Giandel 4000-watt pure sine wave inverter Two 300-amp Li-Time Lipo 4 batteries wired in parallel. With this setup I am according to the Victron solar...

I have 6 Bourgerv 120-watt panels going to an Epever 60 amp controller. I have this connected to two Weize 100 ah Lipo4 12 volt lithium batteries. The batteries are hooked up to a 2000 watt pure sine wave inverter. I use this to run 2 small chest deep freezers and a refrigerator for about 6...

Going to buy 3 panels at 300 watts each. Will be buying 2 Chin 300 watt Lipo batteries in parallel. Would like to run them all in parallel if possible do to some shading during the day. I will be using a 3000 watt pure sine wave inverter with this srtup. I am considering a Victron MPPT...

I have two Weize 100 ah Lipo 4 batteries that my 6 120 watts panels charge. I am wanting to add more battery capacity. These 2 batteries are about 6 months old and I have them wired in parallel as I do my panels. I would like to go from a 200-amp system to a 400-amp system. Can I try to find the...