diy solar

diy solar

Recent content by aries

  1. A

    Bad cell? Advice on new build

    I'm looking back at my screenshots from post assembly and every cell (except #5 of course..) was within .002V of each other, including #6, so I'm hoping it will level out again after it sits for a while.
  2. A

    Bad cell? Advice on new build

    I purchased 8x280AH cells from Docan Tech in July of 2022 for a 24v pack, but due to family emergencies I wasn't able to build this battery until almost a full year later. Fast forward, I pulled the cells out in June of this year, and every cell was at 3.29V except for one (we will call this...
  3. A

    Which MultiPlus for both 12 and 24 V?

    even if a 12/24 MP did exist, and you wanted the ability to change to 12v in the future, would you size your wiring now to be able to handle 12v? if so that kind of negates the major benefits of using 24/48v in the first place, smaller conducters.
  4. A

    Which MultiPlus for both 12 and 24 V?

    why not go with the 24v multiplus (and keep all the benefits of that system) and install one or two orion 24/12-70 dc to dc converters.
  5. A

    Victron VenusOS driver for serial connected BMS - JBD / Daly / ANT / JKBMS / Heltec / Renogy / Tian / ECS

    Great info, thanks! I already have the BMS, so not too concerned if I can’t use Bluetooth at the same time.
  6. A

    Victron VenusOS driver for serial connected BMS - JBD / Daly / ANT / JKBMS / Heltec / Renogy / Tian / ECS

    I'm looking forward to getting this setup. I have the 24v/100a JBD BMS. The Bluetooth module connects to the left most white connector (UART), is it possible to utilize this driver with either the RS485 or RS232 pins so I can utilize Bluetooth simultaneously?
Back
Top