Most reacted posts
-
Post in thread: JK-B2A24S20P BMS Verify Password to enable settings change
Any updates regarding universal JKBMS Password? My 200A JK 2A BMS now decided the password : 123456 is no longer valid :( Strange things happening.- Reaction score: 1
-
Post in thread: Deye 16K and SunSynk, Neutral/Earth(Ground) Bonding in "Signal Island Mode" HOWTO
This is NOT, how you do PE+N bonding on a DEYE 16K Hybrid Mono inverter. Perhaps with very first revision of this Deye this was necessary, but even the very first manual of 16k Mentions ATS Port to be used for PE+N Bonding (Pins 19 and 20, not Pins 7 and 8) ! First: SIGNAL ISLAND MODE...- Reaction score: 1
-
Post in thread: How to make JK bms communicate with Growat,Deye, voltronic inverters
No communication possible, unfortunately! Only operation via Voltage. But then again that's just fine, since most of are going to use 2,3 or 4 batteries. Me personally for my 16k mono hybrid am using 8 packs of 15kWh on 2 victron power-ins.- Reaction score: 0
-
Post in thread: Deye 16k 1-phase Hybrid AC-ONLY
DEYE 16k 1-phase Hybrid 8x 17kWh LIFEPO4 Systems for total of ~140kWh storage Works flawless... Untill GRID Voltage goes above >265V, then it goes into OFF-GRID mode. (as you'd expect) IN OFF-GRID this thing SHUTS DOWN the POWER to the entire house! IT ONLY WORK WELL ON GRID. I have come to...- Reaction score: 0