Aussie's latest activity

I have one cell that is running high and my BMS is taking its sweet time balancing so I ordered a 4S active balancer from ebay and when...

I'd let the battery rest an hour at zero amps with a disconnected power cable before attempting to check if the voltage is within...

I got the values to change. Using the Overkill App. No warning come up. Their was no power coming in and only a few amps going out...

They are dropping down. I think it may have something to do with the lower EV demand and perhaps lower demand in China overall(not just...

Thanks featherlite. My app looks different. Is your app one you pay for? The one I have was free.

How do you access the calibration screen on the Xiaoxiang app ?

It appears that the Overkill manual was written for the Xiaoxiang app. On the the Xiaoxiang app, a warning appears saying "Note: only...

I am using the overkill app and when I go to calibrate no warning comes up . I can input figures, but when I push "Write" it does...

I haven't noticed the difference in the total voltage total as I was only checking cells.

I think I have got a significant variation. 0.080 v Or is that nothing to worry about?

Thank you. I have downloaded the manual. I shall see what it says and have a go.

Do you have the Overkill manual? Appendix B tells how to calibrate. Elsewhere, the manual says: If you plan to calibrate your BMS, the...

I attempted to do this. I got on the calibrate screen, entered the correct voltage, pushed "write" and nothing happens. Do the cells...

I have an Outback system using SOK batteries setup similar to yours. My system On a daily basis my batteries are only charged from the...

I have absorption charge set to 55.4 and float at 54.0 With just passive balancing from the Overkill BMS, my delta on all four...

I am about to replace lead acid with lithium for my standby system and am interested it settings as well. Any more comments? Or...

If you look at the invoice you got from the suppler, it should list the items of equipment you paid for.

I think they are A grade cells I am pretty sure my Rept's were A grade. Sorry, I just checked his web site and they do say B grade.

It was disconnecting the two BMS, connecting the one not working on its own, it started working, and then hooking up the other one with it.

Some how I missed your response. Sorry. It would seem that you nailed it with your advice. Thanks again.