Recent content by Axlsavage

That I dont know. But I will look in to it.

Its set at 24.8v. I just lowered it to 23v to see what would happen. My ac output started working.

For a 24v system, what do you suggest as a good low dc cutoff?

Cannot visually inspect relay but it does switch over, I can hear it. The only thing I can think of is, I must have a setting wrong. There is a big menu with lots of parameters to change. I must have something set to low or to high Pic of my setup....

When its plugged in to shore power the inverter light stays solid. When I unplug from shore the ac light flashes. Thats about all all it says. But the inverter is on either way. As long as there is battery or solar. I hope this helps.

The green ac/inverter light is no longer solid. It is now slow flashing.

When you say Disconnect the Mains, Do you mean unplugging it from the wall?

27.1 Volts

Im sorry noob here. Where are the side dc terminals?

Update: I get ac out when the unit is plugged in to shore power.

Thanks for the reply. No one ever chimed in so I just went ahead and bought it. And it worked fine. I guess sometimes you just have to do that and give it a try LOL!

Hello, I have a Growatt 3000 24v. When I first set up the system with batterys and ac in, I had ac out to my power strip. Then today I finally had a chance to hook up a 200w 24v rich solar panel. The unit showed that it was charging via solar giving me 36v. So then I turned on the power strip...

I have a Jackery 500 and I bought a Rich Solar 100w portable solar panel. The panel has Anderson connectors. I know that the Jackery has a 8mm input. Im trying to figure out what 8mm to anderson connector assembly to purchase so I can use my Rich solar panel. Im thinking of this from amazon...

The line going in to the modem is ac straight to the wall. So no there is no wall wort. It would have been nice if there was. So Im waiting for my kill a watt to come in then I can really see what the power usage is.

Thanks for the reply. My router/modem is AC so I have no idea how to make that run on DC. I am getting a Kill a Watt meter so I can see what wattage it really is using. Im a noob LOL! Now the journey begins!!