Most reacted posts

what firmware version ?

anyone did these schematic in one phase with sucess ?

anyone here with solis can confirm if compatible and what protocol are using ?

i have an tdt bms conecceted to one victron and for some reason it reaset soh to 86ah from 280ah is the second time it does did this append with anyone ?

I have to replace all of them run out these brand !

anyone have the JBD-UP16S010-L16S 150A firmware ?

that is not good to hear !

but do you know i f can be done like these without any problem ?

So i have follow these scheme and is working well during the day, but when pv's gona at the night i notice the loop started as you can see in the pics, now i have donwload the GW es 5048 from goodwe portal put the firmware "slave" on the *48 and the master here i got in troubles because it fot...

what is the official link of jk bms ?

what would be best settings for early 100% ?

hi i know this thread is old but i would like to ask, i have seplos battery, and sometimes i get the OV-Vbatt-H fault, so i guess if i lower the voltage charge will resolve the problem, once is Can comunication, can i set for ex 56v max Voltage charge instead of 59.5v factory value, and what...

L48 are you getting alarms on inverters, tdt is only one that do that ?

hi anyone found solution to SOC problem, i did the 0 discharge but it back same problem, around 51.1-52v assumes 10% so is very wrong the SOC ?

could you share name of last firmware they give to you ?

anyone knows what is the firmware stable version on V19 ?

could you post your settings ?

do you have smart sleep on or off ?

with that protocol i got alarm when max with big panels power, jk says the protocol to use with solis is same of Deye anyone confirm ?

i have tested that and if you have many power from panels when get 100% you will get alarm and need restart invertrr then to discharge... on these particulary model S5-EH1P5K-L, on the S6-EH1P8K-L-PLUS not get same issue and yes is work fine with pylon protocol