Hello, yes I did figure it out and can now use this BMS in a 6S-10S configuration.
If you have been sent something 15S I'm guessing you've been sent the larger JBD-SP15S020 which I don't think you can use in anything below 11S, it has a minimum voltage of 35.1v according to the specs.
Has anyone ordered the JBD-SP10S020 in a 6S configuration per chance?
This BMS can be ordered 6S-10S and I've ordered it in 8S and been able to change it to 10S by unsoldering the solder joins on the balance leads and then specifying the new cell count in the app.
I'm now trying to use one of...
I have both a BT module and this touch screen connected via UART at the same time with a cable I soldered myself and it works. You can't have both the screen and a connection via BT used simultaneously but why would you do that?
When the screen is on the BT doesn't work, but the screen turns...
Did you lodge a dispute through Aliexpress? I've had a few small electronic items arrived broken or not working and I've found the dispute process to be excellent.
Also my very first purchase of CALB 100ah cells came from OYE and Aliexpress mid last year, everything was great for me so sorry to...
Who charged them at 4.3v? They didn't do that themselves whilst being connected at the correct voltage maximum of 3.65v.
Why didn't more of them swell if they were all charged to 4.3v whilst in parallel.
The first photo you provided with the two most swollen cells on the left, has the cells in...
Then how did the two cells get to 4.3v as labeled in the picture? The Overkill BMS would have cut off the charge.
I think you need to clearly read some of the previous replies you have received because your last few responses seem to have glossed over the facts and warnings about how this so...
They are probably just being very cautious, don't name your product a DALY product, could you even advertise that it is using a DALY BMS inside? I have no idea over these matters.
That BMS almost looks like a JBD (Overkill) but can't be sure from the pics. Assuming it is, I would ask them if it has the capability to have Bluetooth added to use the Xiaoxiang app, even if they won't supply it you could add it yourself.
Would be very interested to hear how it goes if you...
Don't know if they are copper, they have some scratches and it doesn't look like copper.
Those two layers are about 1.5mm thick in total, I have some of those multilayered CALB copper busbars and it's about the same as 3 of those layers.
Yeah I won't be running heavy loads either but they...
Hi
Has anyone else received or seen busbars of the attached photo type and if so, how many layers are there usually?
These came with Lishen cells.
These feel suspiciously too thin, like they usually come with more layers but someone has seperate them, used new heatshink and doubled or tripled...
Have a look at this page, there's a link to an Aliexpress store. I enquired with JBD direct on Alibaba and they didn't list this module but the sales agent knew about it and it was available for purchase when asked.
Post in thread 'JBD 150A "Smart" BMS'...