Recent content by brandonboosted

Assuming your talking lifepo4 most guys run 55.2 (3.45 per cell) for absorption and 54 float. Hopefully this answers your question.

They told me if I want to monitor the master I can use the Bluetooth but otherwise no plans to ever fix this for upcoming new bms'es.

Ok thank you, about to order another box from them ill be sure to voice my opinion to the salesman that prob won’t care lol.

Has anyone figured this out?

Update, used the can dip switch settings and for some reason had to reboot my cerbo and I have data! My only problem now is that battery #3 won’t show up on the computer software but shows on the can system in the vrm, I’m hopeful that the update to 2.8 will resolve this.

I tried that as well, I have 2 10C version and 1 10E version bms. They are all running ver 2.7 I’m going to try to get them to this new 2.8 and hope that does something, seems that’s what everyone else that’s working is using for firmware version.

Yes I wired it exactly to this

Still no luck, I don’t see any sent or received packets either

Thank you for that, that forum had the wire diagram for that cable I will try to make that and post back

Using standard cat cable from master seplos bms can to victron bms can

Trying to connect my victron multi ii’s to my seplos mason batteries, it won’t pop up on the cerbo has anyone had this or know if I am missing something?

Good to know thanks for the info. In configuration I only ever go to 3.45 per cell. I have 3 other 280ah 48v packs that I did test this way (didn't know better at the time). These other cells hit .10 in roughly an hour unlike these that cant hit 1ah in 2. It was just an observation I thought...

Some of the cells wont even absorb with a 1A cut off current. I stop it before the timeframe gets too long but just thought this experience was abnormal from my previous testing and other tests online.

A lot of guys including myself used Unistrut it works well and is readily available.

Not needed but just thought it was unusual as every cell before that would absorb in a couple hours to the threshold.