Renogy AIO 48V system. Brand new with remote and Bluetooth dongle. Selling because of needing to down grading to 24V system. Shipping extra from Vancouver BC. Or Blaine WA.
https://ca.renogy.com/48v-3500w-inverter-charger/
Cbf@cbfraser.ca
I'm doing initial testing of a 48V system - 2 Jenko 465W panels in series, Renogy AIO 3500W system, 4 100AH Aolithium 12V batteries. The renogy app shows 200 to 300W PV charging watts (cloudy day so seems reasonable), the Renogy panel is showing .07kW load ( a test light with 60W incandescent...
I have a small system that will occassionally go below freezing and I was intending to count on the BMS stop any below freezing charging while unattended during the winter. I was somewhat surprised to get this back from support:
=======
Hi,Mr Fraser
BMS will automaticlly switch off the...
I have 4 Aolithium 100ahr - 4s - that I intend to use in series for a 48V system. Putting the 1st battery on a charger that claimed LiFePo4 profile, I could see from the Aolithium app and Overkill that the BMS was in balance mode after some time but while the battery now shows 100% the cell...
My Aolithium 100Ah 12V batteries are in a 2s2p battery bank and are charged by panels via a Victron 100/50. I am considering
adding some 7/24 load (small fridge) and given sufficent cloudy days will need to charge it from a generator. Researching
high charge rate 24V chargers - the Aegis 25...
A simple way to view application screens remotely is to use a low end android phone or tablet and an Automate by llama(free) script to take screen shots of each app and email them home on a desired schedule. Attached script for example screen shots renogy and aolithium apps daily at noon and...
FYI I asked Aolithium for their recommendation for long term storage of their 100Ah 4s 12V batteries in a 2s2P setup where the batteries are unattended for 8 months in temperatures low but mostly above freezing. Leave connected to solar charger or disconnect? - they came back with the...