clockmanfr

@clockmanfr I have followed your posts on various Australian forums over the last decade, you should post more on this forum - i think...

Most inverters use multiple power supply rails, +5v, +12v, with usually an isolated gate driver dc supply as well. Now the problem is...

Shoot through of 200ns can occur on start up with the OzInverter with a poor switch on proceedure and can give contact bounce on the IFB...

Thirty five watts of idling power for a 15Kw rated inverter is quite an achievement. My idling power is the same 35w, but for only a...

That was really more in reference to me finally getting my butt into gear and off of facebook and various platforms, and doing the tasks...

There are three build threads for this magnificent device over at The Back Shed. Here is a link to the final thread, the first post has...

Roger has a really huge 48v fork lift battery. Its a pretty big core, and there are sufficient turns for only 1 Tesla. This is the KING...

I've been following this thread with interest and wondered if anyone might want to see my efforts at building a Warpverter. It's been a...

All of the above should also work just as well with a Warpverter. Oz inverter or Warpverter are functionally just devices to turn dc...

Okay good to know. With the OzInverter we keep the windings reasonably tight on the winding counts, so we have reasonable headroom at...

Been thinking about the 'Warpverter' for use in ac coupleing and back charging to the batteries. ????

Its only one part, and it may be a quite small part. By definition a choke has "some" dc component (an inductor does not). Now the...

Magnetization curve is certainly important for the dc ampere turns through the choke aspect. Along with that, we need to think about...

DIY Inverters, Making the Toroid transformer. From the OzInverter book Chapter 4. The toroid is the most effiecent transformer, with...

Totally agree with Warpspeed, getting the choke spot on is a black art, as there are so many varibles at play.

Read through this whole thread yesterday about Roll your own MPPT over at the Back Shed. Lot of discussion there also about chokes. Goes...

Designing chokes is a particularly complex subject to get ones head around. Unlike most electronic design tasks, there are no step by...

Now I so wish I had more time on my hands - I'd build one of these... In any case, @clockmanfr - you've got a book order ;)

There were a lot of discussions and some arguments about chokes back in the early days over at the Back Shed. It took quite a long...

I thought that some of you might want a good tech read about Inverters. It shows the development and general tech explanations of the...