• Have you tried out dark mode?! Scroll to the bottom of any page to find a sun or moon icon to turn dark mode on or off!

diy solar

diy solar

Most reacted posts

  • Post in thread: I am going to try a DIY mini-split!

    I recently installed a Tosot 9k BTU 230v mini split LINK in my sons room. It was fairly easy, except for my mild mechanical incompetence causing delays. I got my 608 universal certification with the Skillcat app, cut and flared the lines, nitrogen pressure and vacuum tested, ran an electric line...
  • Post in thread: Microinverter into 120VAC single 'phase' ?

    NEP BDM-600-LV LINK
  • Post in thread: Which mini split?

    I installed a Tosot 9K, you can search for coupons to lower the prices (or get them off a youtuber video). Tosot (Gree) shipping was fast, 3 days. I paid 538$ for mine.
  • Post in thread: High power, 120v-500v Lifpo4 batteries for new Sungoldpower SG11.4KHB-HV Inverter?

    The data sheet on Self2Solar indicates it has UL9540a .
  • Post in thread: Gateway and production with chilicon Inverters

    On the Kinect Solar website, it shows a large order of Chilicon micros being delivered in July. However I don't think they sell to the general public.
  • Post in thread: Which mini split?

    I've been running it two weeks. I have not noticed any issues yet. I will use it mostly for cooling, it doesn't get that cold here to use much heat in the winter (Sacramento). Here is a Referral link, its 80$ off, I'm not sure if it stacks with other coupon codes though.
  • Post in thread: What Mini-Split did you use, and Why?

    I went with a Tosot 9k 230v Unit, a Gree owned brand, middle of the line. Turbro is another Gree direct to consumer brand, slightly lower efficiency. I paid 538$.
  • Post in thread: Gateway and production with chilicon Inverters

    Here is a link to Chilicon manuals and datasheets, have you rectified your problem? How are the micro's working for you? I'm considering a non-enphase micro (Chilicon/Hoymiles/NEP/Aptos) if I can ever source any.
  • Post in thread: What I'm learning about DIY Enphase and Hoymiles Microinverters

    DThames, You may be able to narrow down which microinverters he means by going to the CPUC website, downloading the list of currently approved inverters, then click 'yes' on the microinverter column, filtering your results. Doing this I see Altenergy Power System Inc, Chilicon Power, Enphase...
  • Post in thread: Which inverter would you recommend for 2 Franklin batteries and 3 arrays of 4k watts of panels

    You'll need either an inverter(s) w/MPPT's or microinverters to feed to the aGate. FHP should be compatible with Enphase, as that is what they specifically designed it with in mind. The aGate can either be between your meter and main panel, or via a breaker to feed a critical loads panel. I...
  • Post in thread: Opinions on Fortress Power?

    DFM379, I'm curious about your system. I'm also interested in either Homegrid or Fortress battery, but haven't decided yet. Can you give more information about your total setup? What state? Cost? Self Install? Etc.
  • Post in thread: DC powered mini-split versus AC, efficiency worth it?

    Apologies for resurrecting an old thread, but https://fullbattery.com/ has DC mini splits and other AC. Don't know if the cost pans out over buying a cheaper AC powered one.

diy solar

diy solar
Back
Top