Most reacted threads

https://signaturesolar.com/ep-cube-energy-storage-system-all-in-one-solar-backup-power/ It's pretty. Warranty (assuming you follow terms, is 4 years). Definitely a little more pricey than what you can build in terms of capacity with EG4, $22.8k for 15KW output, 20 kwh. Video training...

So I've used EG4 V2 48V batteries, I got them pretty early. Capacity seems fine, but their coms firmware and documentation - let's just say they should have still been beta testing.. I stopped trying to get the communication to the inverter. I've used LiTime 12V and they offer a 48V and 51V...

Hi. I'm running a Multiplus-II 3000/48, Cerbo-S GX, and it's powered by LiTime Comflex 48V batteries. I've got it all up and running, but BMS communication doesn't seem to be functional as the Cerbo is not indicating anything in terms of battery capacity. The battery is set to Victron CAN...

I'm seeking the "mobile" firmware version for EG-4 6500EX-48 inverters. Seems the product pages got moved around and prior links 404, or don't have firmware links.. Old Product link (404) New Product Link (no firmware downloads) New Firmware page, no EG4-6500EX-48 Listed What's the secret here?

I two (split phase) 6500EX-48's that have "mobile" firmware loaded and one has the neutral/ground screw installed (I assume I need only one as the inverters are tied on the output side). Adding the mobile firmware and neutral/ground bond cleared up any issues with GFI sensitive equipment on the...

Hi, I've got a Victron Multiplus-II 48/3000. It's connected to Cerbo. I have comms setup (and functional) to 2 x LiTime 48V (51v) 100aH ComFlex batteries. If I understand right, I'm using DVCC which leverages the battery comms and BMS to control charging, battery cut off, recovery etc. This...

So we're starting to push pretty good power through our battery systems. I have 3 EG4 LL V2 batteries running this right now. I'm currently testing with (2) EG4-6500ex inverters and we are putting out 7.6kW AC. Batteries indicate output of 55A each. With inverters reading 165A (sum of...

What is the correct way to connect these? I've seen videos where it is done differently? I believe it should be from BAT 1 <COM> to BAT 2 <BATTERY>, BAT 2 <COM> to BAT 3 <BATTERY>.. But I see it done a number of ways (below).