Most reacted posts

Thanks i used multimetar on diode setting...it started in 1sec

I now they dont give 100% but i wasnt shure how much exactly But today my 6pcs 455w came to 2.65kw output...so im very happy

Hello...i bought table top charger to top balance my cells but i cant increase amps to charge the battery...can someone help...this is my first time using this

Thanks for this nice and informative reply...i have 6pcs 455w panels and 8pcs lf280k cells and jk 200a bms...in future i will expand my sistem but for now this only goes to part of my house... balancing the battery is my priority for now before i start to assemble everything

I Don't have grid,so whan inverter is off i have to bring other battery to be able to start the inverter so it can charge empty battery

Bok ?takoder ajd bar netko nas da se nade...potpuno sam novi u svemu ovome zato i postavljam tolika pitanja ?? taman sam dobio baterije pa kemijam kako i sta s njima najbolje da ih nebi zeznuo...jel imas ti iskustva u svemu ovome

so i finally got the batterys...now my question is can i top balance with inverter in any way? i have no special charger to charge the battery except hybrid inverter

.i have 8 pcs 280 eve cells...i cant set equalisation time to 0...min is 5 Charge source i set to solar first utility only whan no solar Max utility charge 30A Max charge 80A The rest i didn't change

Hello...i have 11kw new inverter and i just made 48v lifepo4 battery for that inverter. When i power on bms i trigger discharge short circuit on bms. If i leave inverter off and power bms again it will trigger discharge short circuit again but after 60sec bms will try again and after that i can...

So I didn't do top balance because i dont have charger to do that...i made a battey and connect it to my hybrid inverter...now i have a cell that go to 3,6 to fast while the other cells are on 3.4 and that cell trigger protection and shut off charge...what can i do to fix this

And that should be ok?

and what wire size and fuse do you recomend between battery and this inverter?

hello...i have 6panels connected to my hybrid inverter and im planning to add 6 more but on other side of the roof.. is it possible to add one mppt controler to that secund arrey and connect to the sam bms as the hybrid inverter is connected? thanks this is mppt i have

thanks for reply....after a litle more reading i found out that i cant send my excess power back to the grid so i dont now what are my options now...is there any inverter that can use bouth grid and solar but without option to send power to the grid...i found this one where is stated...

Will i damage the cell if i charge it with 5v 15a power supply

Thanks

So i managed to charge the cells to 3.65 Now the battery is running the loads...what do you say is this ok

Hello...i have eusan inverter that im holding in my shed...is it possible to extend wires for displey cca 10 meters so i can have it in my living room? Thanks

so i decided to buy battery's..it will be 8x 230Ah what size of bms should i use?is 100a good

Cloudy day today but when i put my hand to the panel and other to the ground its not paynfull but its not plesent eateher...0.2 volts show on multimeter...if i ground the panels should that go away?

Im new to this can someone please tell me can i use lifepo4 battery with this charger? 12v sistem

did you ended buying from them or? i also cant decide

Can i use 9v battery on my 8s bms? I wired everything but its not starting...i even connect to hybrid inverter and still no luck

https://datacommexpress.com/str/product/ws-c2460-40a-solar-charge-controller/

around 1 meter for the wires

so better to build 2 12v than one 24v? 8pcs of 230 ah lifepo4 cells

hello...total beginner here...im learning and looking to start buyng equipment for my solar project for start i will go with probably this inverte and today i was looking in to batterys that is cells 21700 i can get them for 2,70$ new 4000mah samsung and was thinking to build 14s5-7p is this...

fr yea my location is eu...Croatia :) i want to bild it step by step so i dont have to give too much money all at once thats why i want start with couple panels and than later i just add more and more depending on what i need and how much do i need my power consuption is this...

Yes they were...3.65 and than i put them in use after 1h

So it should work?

yea but now i only have 8 cells so one 24v battery....so i should not look under 150a bms?

And what can i do? Is it ok to power on this way? Should i increase scp delay from 1500 to 5000?

Yea its a 10wire connection...but with some soldering i can extend it but the question is would it work with 10meter extra length cable

But if i charge it to 3.6 and stop

I set it at 27,6volts and float at 27 Is that ok

Hello...i have problem setting my hybrid inverter... Its 12v 1.8kw I have 12v 280ah Lifepo4 Diy My problem is that my battery run very low and i can no longer run my inverter. Inverter can't run without battery What setting should i put on battery (jkbms) And what setting on inverter Thanks

and off grid inverters use solar while it have plenty of w but as soon as it cross over max of solar it automatically transfers to grid?

are you talking about charging in series with inverter or in parallel with different charger?

yes im planing to buy 5 pcs of solar panels for start because that inverter use the power from solars directly as i understand in combination with ac input and battery when i add them...inverter im planing bigger because i will add more panels in time and batterys also im not new with spot...

you have any recommendation for good but not too expensive?

so after a lot of time thinking should i or no i decided to go with it.. i bought 4x risen panels,not much but it's a start and i went with this hybrid inverter i'm planning to connect just part of house on this and also to the grid. in series connection,without batterys for now,and without...

This inverter doesn't have that settings...im still trying to figure out whan will charge of battery come on again...im not shure i set that correct...or better say i dont now how to do that...any point on that maybe?

today i put my panels on roof of the shed and when i connected them all in series and to the inverter everything was working but when i touch panels and ground i feel current flow in my hand...is that normal when there is no ground installed

So i make 8s battery connect bms and connect to hybrid Inverter and charge the battery normal?im new to all of this sorry for stupid questions but i just want to be shure

Hello... yesterday i installed 6pcs 455W panels on my shed. Everything is working but i have a problem with current flow from panels true me when i touch the ground and panels at same time. It's not strong but its not pleasant also.. What could be the couse of this?

maybe this..or better not...

How much should i get from my solar panels? I have 6 455W and now in 9:30 in the morning max is 2kw Is that ok

i now...but i was hoping that i can find something cheaper but good :)

And how can i change power settings if the inverter is off? If i put cell under volage to 2.70 on bms And 2.75v per cell on inverter will i be able to power on inverter after shut down

So its possible to connect the way i want to on this inverter? In future i will buy mppt for one of the strings Maybe you have recommendations for one that is not too expensive

Hello...i need some help if someone is willing to help 🙂 I have 12v sistem in my boat and i have 36v Thrust Electric Trolling Outboard Motor that i want to power with 105 lifepo battery pack Now my question is can i use some kind of dc to dc convertor so i can charge this lifepo4 on board insted...

what would you recommend to me?i dont have battery's and will not have them in near future i want to use my panels

Ok thanks for the info

Yea i understand...now i got max 2.4kw What is the best way to measure what i producet in one day? This app that i have give me no data...smartess is the app

hello...im looking to start my solar adventure and found this solar inverter...now the more im looking and reading the more is complicated for me :ROFLMAO: if i understand hybrid can use solar and grid at the same time? for now i have only 1kw solar panels so when the sun is shining and my house...

So i have 6x455 solar panels 3.5kw charger My settings are solar first than battery than grid,setting voltage point back to utility at 25,5v,back to battery 26,5 just to see will it trigger charge Bulk charge at 27,6 Float at 27 And this on picture i just set equalisation voltage to 27.6 because...

Yea... that's what i wanted to avoid... charge the battery manually

yea here it is...im planing to take 2 more soon..so better 6mm ok..thanks for info https://www.powland.net/products/3.5kw-solar-inverter-220v-mppt-solar-controller-pure-sine-wave-100a-500vdc-24v

no im in croatia eu

so 12mm thick wire if i understand this correctly

This is the photo of panels And Inverter...one part of panels would be on one side of roof and other on different thats why i try to maximise solar production

Hello...i need help to cennect my panels best way possible...i have 12 panels 50v voc Is it possible to connect them in parallel 6 panels on one side 6 on other...also my inverter is 500voc max so thats main reson why i want to connect it this way

Ok thanks...i will do it like that slow charge than check which is faster in charging than discharge a little that cell and like that i circle

So So i just found out this There is a BMS on the battery but there is no communication protocol, so the BMS cannot be used kind regards Is this a problem...i have jk bms ordered

So So i just found out this There is a BMS on the battery but there is no communication protocol, so the BMS cannot be used kind regards Is this a problem...i have jk bms ordered I got that response from seller... What to do now...my inverter is in post office waiting to be picked up...what...