Most reacted posts

Wow! That a great idea to use busbars, I'll order copper plates ASAP for this. Temporary I will connect 3 batteries diagonally. Thank you for the info, it's very useful (as well as other suggesioons) Till there is no power cuts it's in storage mode ( I don't have solar panels yet and won't have...

Hey guys, I need help in voltage setup for EAsun 6.2 KW (7000 VA) 48V + 3x parallel Eco-worthy battery packs (51.2V) with BMS on each other, but can't communicate with inverter. Do have a few questions. 1) Is it possible and make sense to replace BMS in the batteries for the ones with Bluetooth...

Thank you for the reply. 1) OK, thanks. That was a question I was thinking of too much. 2) ++ 3-4) 150AH total. The default value was 56.4V for the Bulk charge. But if it's being controlled by BMS, is there any reason to play with values? 55.2 v for 16 cells would be fine for 4 hours charge? I...

BTW, bought 3.2KW/ 24V (100 AH) system for my parents. Should I divide voltage values (bulk, floating, etc) for 2?

And about floating voltage, I read that voltage is not necessary to keep in high range because of almost no self-discharge in LiFe and even lower values rather then 52.2V were suggested. But 54V was the default in my system