Most reacted posts
-
Post in thread: Communication between EG4 Wall Mount Batteries, and JK BMS
Yes and no. I've taken all my batteries off of closed loop communication with the 18kpv inverter (so they're all in open-loop state and each battery BMS is handling how much charge or discharge the battery is doing). The two EG4 WallMount batteries were originally in closed loop communication...- Reaction score: 1
-
Post in thread: Questions about Load-side Tap with Grid Backup.
I have and EG4 18kpv, and I'm trying to find the appropriate settings for the system I would like (if possible). Right now my system is completely off grid. I turn off the 200A-main breaker to turn off power from the grid, and then turn on my inverter/solar/battery system. I have a load-side...- Reaction score: 0
-
Post in thread: Communication between EG4 Wall Mount Batteries, and JK BMS
So after Will Prowse posted the video on the Yixiangpower DIY upright batteries, I bought and assembled one of them to add capacity to my 18kpv system with two EG4 Wall Mount batteries. It helps, but it doesn't communicate with the other batteries. The inverter only 'sees ' or communicates with...- Reaction score: 0
-
Post in thread: Crap Fuses for 12S2P or Sizing Wrong?
I have two strings of 12 solar panels, a 20A 10x38 fuse on each end of each string, then they're paralleled and then another fuse at 32A. I will readily admit I tried to save a few bucks on fuses and bought the fuses below. They're for car audio and other electronics, but rated for 500V, so I...- Reaction score: 0