I used the POTS in the C40 to adjust the voltage. Don’t remember both settings, but one was 14.6 volts for the bulk setting. All other settings above are unchanged.
I did add another meter to the installation so I could monitor both the output current from the solar array and the input current to the batteries. Limited the Trace inverter to 8A ac; this is under the "Max Charge amps AC" setting. So 4A ac for each 206AH battery in parallel. The...
I have an old Trace/Xantrex SW2512 Inverter/Charger. I would like to know the best settings and understand those settings for the new LiFePo4 batteries.
This is not the newer Schneider Conext SW series, but an original by Trace from the last millennium.
Complete system is:
6 Kyocera KC120-1...
Agreed, 5/16" is a great fit. Something related and is not covered in SOK's data sheets is the complete screw size and the depth of thread of the terminals. My SOK 206Ah batteries came with 8MM by 1.25MM thread pitch screws. The length of supplied screws may be too short if you attach...