Recent content by houts

Do you any website links to tutorial pages? I mean...I can purchase 1/2" PVC sheet, but wouldn't know a clue as what to do with it. Newb here.

That will be next. Now I have to figure out how to do that.... Enter sad laughter here. :)

Plugged in the Tesla and set it charge at 6amps. It took load--so far, at least--with ease. Here is what my Growatt shows:

Sorry, but you're way off! You, and the many others on this forum, have helped me along the way in doing this. Before beginning this project, I couldn't tell you what a 120 outlet was in comparison to a 240. Yep, that's me. Here is the final result! How does it look?!

As always, you're the best! Got it!

Thanks! I'm just concerned about fucking it all up that I was overthinking it. I appreciate your kind response.

" Sorry for the newb question, but do you mean simply a red wire should run from the inverter into one of the batteries (as shown in the photo)? The same would be said for the black from the inverter to the battery bank.

I've purchased four 12v 100ah AGM batteries. Are the diagrams below correct to set up four in 2S2P for my 24v inverter? It should be 24v with 200ah. Also, I have 2WG battery cables. When I connect from one 12v battery to another, do I use a red or black wire? Does it matter? Solar panels x 4...

Sorry if I'm not clear, but I was wondering (question) whether it matters which red or black wire I use in the diagram above. -Shawn

See above :)

What I meant was which red or black wire do I use to make the series and/or parallel connection

?

Thanks! And now the newbie question: I have three black & red 2 AWG wires. I can see the red cable from my inverter would go to the bottom left 12v battery and the black cable would go to the bottom right battery. What about the other ones? Do I use red or black, and if so which one?

I've purchased two more 12v 100ah AGM batteries. Are the diagrams below correct to set up four in 2S2P for my 24v inverter?