Most reacted posts

LOL. Yet a number of us need to deal with another four letter word. Snow

Something like this might be a consideration for the angle: https://www.amazon.com/HHIP-3402-0302-Slotted-Angle-Webbed/dp/B00N40VBGA/ref=sr_1_3

There are filters and dampening devices that can be plugged in. I did a deep dive into this and Emf a while back. From my findings some are uneffected, some attribute their health challenges to something else and some are helped by lifestyle changes.

We have a number of very talented and experienced members on this forum. @upnorthandpersonal has made some amazing contributions to this forum. He has an amazing understanding of the technology and his understanding of the electronics behind the Bms is second to none. I top balanced my first...

This is a model that has quite a few years of usage under its belt. I remember your discussions about the inner workings of it in an earlier thread. Would be also be intrigued at the chance to test run a model if the chance ever presented itself.

If I look at the description properly, the middle position is off. The far left position is inverter on. The far right position is charger on. If that is correct, then wiring the first and middle spots would give me a simple on off for the inverter. Is this correct or am I missing something...

I know 18650 is selling these as grade B if I am reading the web site correctly. Where else are others buying these?

My Overkill experiences were a little more disappointing and one ultimately failed. Reason I went with JK technology which for me has worked much better. While the door was opened to suggest other technologies might I suggest another thread for this so this thread can stay on topic.

Are these all coming in via UPS? Having said that internal packaging left a lot to be desired

Good point. Considering I am running LED lighting could be a great thing to consider.

Who could lift it?

@timselectric I think you may have already answered this question for someone else. If I don't run the white neutral wire from the transfer box to the main I would be OK? Again, perhaps I misread this: https://diysolarforum.com/threads/wiring-question-pro-tran2-transfer-switch.96624/

Found this interesting: National Electrical Code or NEC limits the total number of bends in one continuous run to 360 degrees or four 90 degree bends. It specifically states, “There shall not be more than the equivalent of four quarter bends (360 degrees total) between pull points, for example...

Looking at no voltage release options

I know a ton has been written about this. I send to learn by seeing. A while back Will did a video on an Overkill 8s wiring. Instead of the block build (12 plus 12=24), this video had everything in a line. It was so clear and easy to understand. I have been unable to locate this. Any...

I have the Multiplus 24v previous generation. Likely won’t work but perhaps drop charging voltage by 50 percent just to see?

I know there are torque screwdrivers. I strongly considered purchasing one. On the other hand a friend of mine who is a mechanic has a high end professional digital torque wrench that he lets me borrow. I found these and currently plan on using to torque the screws in per EVE documentation...

I am in the planning process and will be purchasing batteries. There is a great deal of conversation on this topic. In readings, two suppliers have risen to the surface as being two excellent sources of obtaining lithium technology batteries. The first is Amy Wan of Luyuan. Feedback on this...

Very true. Went with Plan B. Applied layered shrink wrap in the pinch sites. Protects the wire nicely.

I actually have done this for another room and it works well. The reason I am moving this direction is that I already have installed the led lights and they provide more light than my 12v version. Thank you for the idea. However I am still in the planning stages for a number of items so if a...

I used 6 awg as well. Stationary all is well. When I shifted the cord the proximity of the bare terminals caused a short between positive and negative. I have tried to be careful to keep insulated and separate from each other.