Recent content by jkb458

I don't think I've seen an installation with the conduit actually being put all the way into the unit. Just close to it, then the wire is put through. I'm not sure that conduit would fit into the openings. The holes for the PV and DC inputs are about 1 1/2".

This might be a ridiculous question...where would the ground wire go? (the 8/2 wire noted above) There is only a positive and a negative port for the PV input. I just want to be sure this will work before I order the wire. Thanks for your patience everyone....

Is this type of wire appropriate? https://www.homedepot.com/p/Southwire-By-the-Foot-4-Red-Stranded-CU-SIMpull-THHN-Wire-20498299/204724897

Would it it be better to have the inverter and batteries near the breaker box? I thought I would be making it worse to have such a long run from the combiner box to the inverter.

My unit is the 48V. The manual of this Growatt specifies 8 gauge for the AC output. Does it matter how long of a run that is? My distance between the unit and the breaker box will be about 260 feet. My panels are going into a Watts247 combiner box, then into the Growatt. Does the combiner box...

Thank you. I appreciate the advice.

SPF 3000TL LVM-48P

You are correct, my friend. I linked to the wrong manual...hence the mismatched number of pv inputs. Here is the spec sheet for my unit.

Oh...maybe it's linking to the wrong manual...I'll check.

The Growatt is an all-in-one unit. My 60' run would be coming from the farthest panel, along the roof, then down into the combiner box. What would be the proper gauge wire for connecting the panels to the combiner box?

The Growatt is an all-in-one.

Correction: I just received the Growatt and unboxed it. It only has 1 PV input. The diagram in the online manual showed two inputs.

If anyone could help me with wire, breaker, fuse details, I would like to order my missing parts soon. The panels will be on an attached garage, Growatt and batteries in the garage. This system will independent of the grid. Parts I have: *(12) Santan 250W (used) VOC 37.6V VMP 30.3V ISC 8.85A Max...

Does anyone have experience with this particular charge controller? One picture of it looks generic...another shows "Growatt". https://watts247.com/product/sc48120/ Thanks!

I appreciate the help. I may just not use all 12 panels. It's getting pricey to try to use all of them. That leaves me some spares in the event of damage or failure. Thanks again!