Most reacted posts

Yes I Bought in US, seller on eBay.... The unit wasn't to complicated, installed using a 30 amp circuit from main circuit panel, From Inverter using the output feed a 6 breaker critical circuit panel. once connected followed the program flow chart from the manual. it took me about 15 minute to...

Growatt has a V2 Min XXX-TL_XH-US and Also A V3 . The Difference between the two are V2 Support a critical load for back up and will need a Auto transformer and a grid meter to monitor your load. The V3 supports whole house back up, However you will need the SYN 200-XH-US to perform the whole...

I have worked with Jess, from self to solar. Excellent sales person.

I have removed the 4 corner screws to look at BMS which looks the same, looking at photos of sunvault. I have not looked at the cells.

Yes, I have one installed(3/7/2020). I have it set up as an off grid application for critical circuit panel. I do have Lithium batteries connected (19 KWH) with about 1500 watts of solar panels.

built 800 AH system using Valence 12RT 40 AH, Combined with 2000 watt of solar panels, monitored with Victron Venus controller, Victron 700 BMV to monitor the battery bank and a Victron 150/60 charge controller. Inverters use were Victron as well. Output power connected to Critical Circuit...

The battery manufacture is the same as the battery used in the growatt ARO cabinet, just wondering if the communication and BMS is also the same,

I am looking to purchase this model and was wondering which Version of the Min11400TL-XH-US, looking for a V2, Need to verify before I purchase. The part number doesn't look like a V3 or V2. Maybe a version1

Thanks, I haven't bought much from signature solar, but I have bought from Renvu, my V1 Min Inverter and you are so right about the 3 version and their purpose as to how you will need to install them. I've had my share of headaches from the beginning with Renvu, but I've had a better experience...

Hello, I'm using a Growatt Min 5000 TL-XH-US. with the growatt smart meter and autotransformer with ATS and growatt batter(6.6). I have about 10,000 watts of solar connected on two strings one south facing array and one west facing array. I live in Southern California so I get plenty of sun to...

Hello, you would need a grid tie inverter to accomplish what you are talking about, for non grid tie you could install a critical circuit panel and relocate the circuit you would like to power using solar panels, batteries.

can any of you tell me which Growatt Min 11400TL-XH-US P/N Pv01.0105200. V1 V2 or V3. I've search but could not find. Any help would be greatly appreciated