Most reacted posts

  • Post in thread: I am really struggling. Neutral and hot both are energized.

    If any of you ever make it to the Ozarks, connect with me… dinner is on me! I appreciate all your help. Seems good to go now.
  • Post in thread: How’s it look?

    I'm waiting on my PV connectors until the solar array is set up. I also have a ground rod outside and connected to the service panel. I have no other panel for my cabin, so i installed this one with the 3 circuits. I STILL don't know if my model creates an NG bond. For now, I left the NG...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    Private parcel surrounded by ozark national forest.
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    Driveway
  • Post in thread: How’s it look?

    I’m ready to attach the batteries soon ((4) SOK batteries in series for 48v)). I wired up the panel with 3 circuits for now. Solar panels may take a few more weeks till I get them installed. Just wanting to see how long these batteries will last running my offgrid cabin until I get the 3600w...
  • Post in thread: What size resistor?

    Sweet! You rock!
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    I am completely offgrid. No grid power for miles. So, from what I’m understanding is that I should attach the ground bar to the neutral bar in the circuit box? Or is this one of those deals where I need to take apart the inverter and remove that ground neutral screw that some people have talked...
  • Post in thread: cable size?? fuse size??

    I've watched so many videos on how to setup a Growatt 3000 system, but the one thing i can never seem to find is what cable and fuse sizes i need to use? I bought a 3000w Growatt inverter, (4)SOK batteries (12v x 206ah), and I have 3600 watt solar panel array (12 x 300w panels). While connecting...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    Would running the wire between the neutral and ground bar “fix” the problem if the problem originated from inside the inverter? Believe it or not, I’m miles ahead of where I was 3 weeks ago in regards to electricity, but obviously not an expert. Hence, the questions.
  • Post in thread: cable size?? fuse size??

    The SOK batteries have 5/16' lugs. My hope is to get everything i need for this system, but then to have a second set of more experienced eyes help me set it up.
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    I’ll try. I only have 2 hands. Haha
  • Post in thread: Neutral ground screw

    I'm almost there ! Thanks to every one of you experts on this site i'm going to start installing most of my solar setup this weekend. I do have a question about using the green bonding screw in my panel though. I am TOTALLY offgrid. I'll be setting up my Growatt 3000 48v inverter this week. I...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    I’m REALLY struggling. All my outlets are telling me that I have an open ground. I checked all outlets and ground rod and everything is solid. So, I check the circuit panel and all breakers are in the off position but they are still hot. I took video and pics but I’m completely baffled. I...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    This is the make/model
  • Post in thread: EG4 Chargeverter help.

    I guess the biggest problem i have is that it says on signature solar's website that it can be used with a 240 OR a 120V system with an adapter. If there is no adapter that works, then why post it on their website? i need to find an electrician. Unfortunately, I live so far off grid (accessible...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    I just whet thru the manual again. Unless I’m overlooking it I didn’t see anything in there regarding this.
  • Post in thread: EG4 Chargeverter help.

    Thank you for your help !
  • Post in thread: EG4 Chargeverter help.

    Thank you for your help !
  • Post in thread: Need help and a little direction

    Hello all, i'm new to this site although i've been watching Will's videos for about a year now. I'm a total newbie when it comes to solar. I just moved to an off grid cabin. Right now, I'm trying to piece together a system for my 400 sq foot cabin. I'm attempting to buy as much of the hardware...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    I am nowhere near grid power. Unless I pay them to run the nearest electric 5 miles to my house through the wilderness. I don’t have over a million bucks in my bank account. 😂
  • Post in thread: EG4 Chargeverter help.

    Having a problem with the chargeverter I received a couple of weeks ago. I have 3 generators. A Honda 2000, a Champion 2500, and a Champion 4350/3500 dual fuel. The plug in cord that came with the chargeverter doesn’t match any of the outlets on my generator. I called signature solar today and...
  • Post in thread: Need help and a little direction

    Thank you for your reply. I bought the 3kw model that is 120v. The place I'm at is near Harriet, Arkansas. I am actively shopping for panels on CL and FB marketplace. I was thinking about 3kw of panels. I was hoping the battery capacity would be good for what little I'm running. i did forget...
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    Update: I disconnected the 3 wires from the circuit box. I tested those hot/neutral and hot/ground. 2 voltages. One is 57, other is 63. Therefore, it’s coming from inside the inverter. At least I know my circuit panel and wiring is good. What do I need to do for the inverter now?
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    You did offer me some useful information on here, and it is much appreciated. You all have. My 2nd meter showed the same voltages as the first.
  • Post in thread: What size resistor?

    Hello, Somewhere on the forums i saw the size resistor i would need to precharge my 48v 3000w Growatt. Now, I can't find it anywhere. Does anybody recall the resistor i would need so i don't have to have an unintended fireworks show in my workshop/solar shed? If not, how about the size of...
  • Post in thread: Fuse size and cable size?

    Hello. I am almost to the point of getting my solar system up and running. I have read SO much about solar (electricity is my mental block) that I am now starting to confuse myself. I have a 3000w Growatt 48v inverter. I also have (4) SOK batteries that i plan on connecting in series (12v...
  • Post in thread: Fuse size and cable size?

    Thank you so much! It is appreciated.
  • Post in thread: Need help and a little direction

    Maybe a face-to-face to see what your setup is like? That may help me understand it a little more than watching videos all day. Thank you.
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    Enjoy and thanks for your help!
  • Post in thread: I am really struggling. Neutral and hot both are energized.

    Just to confirm… bulb between neutral and ground coming out of inverter. Also, inverter should be “on” position?
Back
Top