Recent content by KC7NOA

It has direct copper contact ... on each is a bridging strap folded over the nut ... look closer , you can see it

I'm going to rearrange my battery from 12v to 48v for a 6kw inverter -- lvx6048. I'm not sure the configuration of wires would be best. I dont want to disassemble the compression straps to turn some batteries to make 48v easyer, but I might need to I realize. So im just throwing this pic in...

Ok ... so I'm still wondering about pull force for those 4.5" pipes

Im glad that you have responded !!!! And I'm glad your making headway. I'm a little surprised that your going to 3 phase. I'm guessing your not in USA. I'm in --way-- north idaho and looking to use 220v split phase inverter because of my deep well. Single phase but with 2x120v that one 120v...

I like the discussion ... I'm looking for a replacement to my deep well pump. It's been in the casing for 20 years and is due for a failure. It's 220V ac ... and im trying to weigh my options I could do 12v, 24v or 48v ... my lifepo4 8.7kwh battery isn't exactly permanently set to a voltage...

How is it going now? All panels connected? I'm interested is the part that auto recognized of lipo4 batteries by the 10420an...

Any GREAT updates?

How have you made out? Are you satisfied with the 10420AN?

I'm still looking ... though iv changed my mind on configuration... putting 4 panels in series .. their stated as 37.6v open. To reduce cost of wiring at 100' has pushed my change ... Is there other better price point for lifepo4 with mppt charger?

The possible issue might be how far the panels are from the charger .... there is abit of loss in cable runs. 300' of double ought cable from the panels probably cost more than the panels and charger

I use a metal garbage can , lined with cardboard ... then a smaller metal can inside with , again, lined with cardboard. With what I want to protect inside ... so it's a storage box essentially.

He everyone, Looking to hear if the EpEver PAL-ADP-50AN works ... and how does it work ... I have 8 250W (40v open voltage) panels that I plan on using (2s2p per mppt charger) with 2 (I already have one) Tracer 8420AN on a 8.5KWh (150Ah lifepo4 -- 4s4p) ... I would like both 8420's to not...

It's not wasted ... The extra watage is not collected

14.5v@40A = 580w, 580w = 120v@5a -- plenty close on the math

I built mine .... I think I posted pics of it ...https://diysolarforum.com/attachments/20191219_171853-jpg.3689/