krell313's latest activity

As it stands now, I think I will have 4x 24v (2p8s) batteries in parallel. I need one relay for starting a generator and 2 more relays...

I did look at this but it only has one relay. I guess I could get three if I could use a single shunt but I don't see how to do that in...

You are right that bluetooth and user friendly apps are needed but I can not control relays with those apps. I was thinking of making a...

Right now I have about 1700A/hr of FLA batteries and this will get me through maybe 2 cloudy days if I'm conservative. Currently I...

Thanks for the link, 8p is too much. As for going to 48 volts, I know that would be better but the 24 volt system I have runs more than...

I don't want to replace my inverters and very expensive lightning protection to handle the higher panel voltage. I did think of that though.

Hello all, I am considering making a large (2200 A/hr) 24v lifepo4 bank but I am having a problem finding compatible BMS monitoring to...

Inverter? Diodes? I was planning of switching in a resistive load across the panels to soak up power when the output power on the SCC...

As I said before, my system is set and not able to add a second SCC. I found the over-paneling guide you mentioned and it does not name...

The Outback FLEXmax 80 is rated at 2000w max solar input for a 24v output at 80 amps. I am running 2220 watts into the FX80 which is 220...

Hi all, I may have a problem with my setup. What I have is an 800 a/hr 24 volt fla battery with a FLEXmax 80 charge controller and 6 370...