Most reacted threads

Please Check my work. i need someone to tell me what Ground Wire size to use for both the Inverter side and PV side. To add I have all the systems grounding going to one 8' Grounding Rod, which will be at least 10' away from my house ground wire OIR can i place my ground rod a little over 2'...

This is my 9th Wiring Diagram. Please check it out and make any recommendations as you see fit, as I am beginning to build. * Wiring lengths and setup are for visual representation only. The actual wire lengths are between <2 feet to 3", while the lay out will be of cart design with 3 levels...

I was wondering if I can use different wire sizes in the same line. For example. For my MPPT and 12 Volt load line to the Fuse box (sized to 4 AWG), can I put in 1/0 AWG from the battery bus bar (110 Class T Fuse) to the Disconnect Switch, then to an interior positive bus bar and then have the...

Have a 100A Fuse Box that will then connect individually to several single Rockers, since the accessories all have different AMP requirements ranging from 1A --20A. This is for a portable (cart) DC 12V setup, which currently has only an inverter. I plan on adding an MPPT for solar eventually...

Please disregard

Decided to go with 12V system, but i think i pushed it to the max. I am a new to this. i figured out that i needed a total of 2300W to power my devices, so i settled on a 12V 3000W inverter,, but then i came across a deal on the lifepo4 batteries, where the cost was extremely low compared...

Think of adding a 350A Circuit Breaker, but can't find one that doesn't make me nervous. I have three 12V 300AH 200A BMS batteries in busbar parallel, where it then goes off in 2 directions. The first with a 110A Class T off the + Bus Bar goes to the 12V 100A load accessories and 80A MPPT...

This is my 8th Wiring Diagram. Please check it out and make any recommendations as you see fit, as I am beginning to build tomorrow along with the wheeled cart I have designed for it. I will upload the actual Cart Diagram along with pictures of the whole system to the "Show and Tell" Thread...

Ok I've got my Battery side 12V 3000W Inverter 900Ah Solar Generator System up and running. Will eventually post on this forum, but need time to put the parts list together. Anyways. I am looking for anyone who has done a Ground Mount in the State of Florida and who is willing to share their...

Here is the 3rd Draft after some help from Rob, The only thing that i have a question about is the 12V Boat Panel with Fuses. The Boat Panel has about 9 devices that can attach to it none exceed 20A. 1) Can i use a Class T 25A fuse or should i use a Class T 100A? 2) Can I put the isolator...