marcfest

I have the same 250/100. Running 3S3P of ~46V panels. I ran these on a 150/100 when I was stupider than I am now. Fortunately, I...

If you exceeded the V limit it wouldn't work at all. The VOC is a worst case number, it's unlikely that you were experiencing that max...

If you're going from 6S to 3S2P you should probably double check the wire gauge running from your panels to make sure it can handle 2x...

One more question: since Brucey indicated that the charge controller was in danger with my current 6S setup of the panels, I want to...

Yes that would be the safe combination.

I like to set equalization V to same as float for LFP.

Generally, series connecting multiple LFP batteries together is not recommended. Not that it can't work, but you need to start with...

Wow, Brucey. Thanks for that warning. Should I do 3S2P for the 6 panels?

Hello, I have the setup and attached a screenshot of my Victron settings for your reference. Could you please check and let me know if...

Check the charge level and if they are all roughly the same just hook them up. IF they are significantly different from each other...

Hello. I hope everyone reading this is well. My 4 Battleborn 100Ah / 12V batteries, configured in 2S2P 24V, have been disconnected...