Mike 134

Clear skies 93% blocked by the moon. Output dropped to 440watts would typically be 6000 at that time of day.

Been awhile since I've done industrial work with Delta services but do remember if you have a high leg a plain old 120/240 breaker won't...

Turn it off & go back to the design phase & post your proposed design here for feedback. Don't try to resolve the current setup until...

You are 100% correct. Over the years when asked to do a side job and the signs of a "handyman" doing electrician work there are obvious...

138 responses later think you helped him or have him so confused he has no idea what to do? Like someone above posted really don't...

I think most electricians on here are not concerned about him smoking his system but, when you have a child getting shocked, it’s a...

Not in the least just look at the wide variety of answers thrown out there from the armchair DIYers. Every response should have first...

Just a quick follow-up to my advice I offered. I fed my family working as an electrician giving me enough knowledge to know I can't...

SAVE YOUR DAUGHTERS LIFE!!!! DO NOT TRY AND FIX THIS WITH HELP FROM THE INTERNET!!!! I'm a retired master electrician. I've tried...

If you didn't show it clearly, how would they know? They are not in the business of knowing what options are provided with the...

following

Your account will automatically be flagged and you will likely have a site visit very soon. If you don't comply and get permitted (...

If it's new unopened box at 50% off from a person I'd take my chances otherwise open box from a person 70-75% off. It is 2 years...

Is that your total cost per KW including delivery and taxes of 9 cents? You can get that rate cut to 4.5 cents with split metering...

My SREC payment is based only on production. https://illinoisshines.com/faqs/

If you want to follow the code for a 50Amp breaker use #6. NEC Article 110.14C(1) will explain.

I just read the the 2023 NEC sec 690.12 and only 2 exceptions do not require RSD. However as you mentioned if you go to the expense of...

You'll need something if it's a roof mount to shutdown each panel. Either optimizers or Tigo units...........

For this scale of professional building one would normally hire a professional designer and contract it out properly. You shouldn't be...

Just following eating popcorn while the OP seeks advice on a commercial scale system on a DIY site.......