Most reacted threads

I am using klatremis/https://github.com/klatremis/esphome-for-deye for communicating with my SUN-12K-SG04LP3, installed on an ESP32 with PoE. It works great, however, I cannot seem to change the update_interval to anything below 20sec, otherwise my log is filled with...

Upcoming first time solar system and 'high' capacity battery owner here. I'm going to be installing a hybrid Deye 12 kW inverter with a 5 kWh LiFePO4 battery setup. I have no idea how the inverter setup works yet, so please bear with me. I would like to charge my EV solely using solar energy...

I'm trying to communicate with my JK PB2A16S20P BMS and Deye 12K-SG04LP3-EU inverter over CAN, using the provided cable. Protocol 00 on the inverter and then I tried 000, 001, 002, and 006 in the JK app, but there is simply no communication going on. I tried connecting the inverter and BMS via...

I've got an JK PB2A16S20P BMS as well as an "RS485 to TTL" board, that has RX, TX, VCC, and GND as input. I've also got a bunch of ESP32, ESP8266, Raspberry Pi, and so on laying around. I tried forwarding the serial communication on baud rate 9600 and 115200 with an ESP32, but I was not able to...

I've got a Deye SUN-12K-SG04LP3-EU inverter and an 16S battery with a JK PB2A16S20P BMS. The setup is 2 meters away from my server rack, housing my servers and network equipment, as well as an UPS located at the bottom of the rack. However, now that I've gotten a complete solar setup, I thought...