diy solar

diy solar

Recent content by mytoolman

  1. mytoolman

    Paying $'s for my Education...again/still

    Michael K thank you for suppling this information and in doing so in a clear understandiable way. This will help me know how to proceed easily. With you Providing links to products, clues on costs I should try to get, and suggestions to have local pickup, my exposure to making costly mistakes...
  2. mytoolman

    Paying $'s for my Education...again/still

    Mr Michael K....please see my short direct answers imbedded in your post next to your questions. I sure would like to know how I can/should use the Progressive Dynamics series 9200 charger/converter if I were to replace my lead acid batteries with LifePO4 batteries. I bet this Progressive...
  3. mytoolman

    Paying $'s for my Education...again/still

    A little back story. Also this is involved so if your not the patient type you should move on to another post. I am who I am and seek the help I need they way I can benefit from it. In my mind I need to present information to get that done. I know there may be a less wordy way to accomplish...
  4. mytoolman

    Will a Bluetti AC200MAX be a solution?

    Thank you Rocksnsalt....yes portability is going to be somewhat of an issue...I live in a condo here San Diego. I can drive ETTT to my garage door to unload whatever solar generator I end up with so I can charge it up. I can NOT leave the truck in this complex though due to the HOA restrictions...
  5. mytoolman

    Will a Bluetti AC200MAX be a solution?

    Edit: I went back and NOW see the section on how to build your own system that Will has laid out. My post that follows was written before I noticed all of this information. I still would have to know what brands and model numbers you all would suggest to keep from buying incorrectly. Out of...
  6. mytoolman

    Will a Bluetti AC200MAX be a solution?

    I would LOvE to save my money. I am basically starting back up from a long dormant situation where no income was generated and finances are clearly something to manage .. i would have less stress if I have a cushion. You have peaked my curiosity. Where can I find the list of items I should buy...
  7. mytoolman

    Will a Bluetti AC200MAX be a solution?

    ETTT is a 1955 Ford C600 Truck. She is powered by her original as built and delivered from the Dearborn Michigan Ford Plant in December 1954 256 CID V8 "Y Block" GASOLINE engine. She still has a GENERATOR under the hood attached to her engine. NOT an alternator....a GENERATOR. Yes a GENERATOR...
  8. mytoolman

    Will a Bluetti AC200MAX be a solution?

    When I work "Ethyl" *THE* Tool Truck (ETTT) is driven between 75 miles round trip a day down to 35 miles per day. She will stop and go up to 10 mechanic repair shops per day. Think of a delivery truck. She will show up, have her engine turned off, then have me go into the work bays where the...
  9. mytoolman

    Will a Bluetti AC200MAX be a solution?

    Mr Sunshine_eggo Super cool that you replied!!! Thank you. With the info you provided I now have a basic game plan. The picture is of "Ethyl" *THE* Tool Truck.(ETTT). Ill be using whatever I end up doing to power the lights and electronics previously mentioned in the office area in the store...
  10. mytoolman

    Will a Bluetti AC200MAX be a solution?

    I will recheck. I had the monitor, laptop, receipt printer and two cordless power tool battery chargers that charged up two batteries that were flat plugged into a 6 outlet power strip. The power strip was plugged into the "KillaWatt" meter for 16:02 hours....maybe i toggled the meter's switch...
  11. mytoolman

    Will a Bluetti AC200MAX be a solution?

    Hi Guys I am trying to power the office in my mobile tool store and wonder if the Bluetti AC200MAX is what will work for me. Here are the ENERGY AUDIT RESULTS: I ran the 120 volt office electronics audit for 16:08 hours/0.61 kWh *** 0.36 WATTS/50 VA *** 0.42 AMPS *** 59.9 Hz/0.74 PF using...
  12. mytoolman

    I feel like a newcomer

    Hi Guys Here are the ENERGY AUDIT RESULTS: I ran the 120 volt office electronics audit for 16:08 hours/0.61 kWh *** 0.36 WATTS/50 VA *** 0.42 AMPS *** 59.9 Hz/0.74 PF using ***120volts These results were with the Monitor, Receipt Printer, Laptop, and two cordless battery tool chargers that...
  13. mytoolman

    I feel like a newcomer

    Mr. jbird526, Body shop guys are some of my most interesting customers. The skill and actual artistry they employ stops me in tracts often. Lol on lugging 450lbs of Power Tech 8kw generator! Mine is mounted as a fixed unit on a fancy slide out tray built into ETTT. As soon as my Kilowatt...
  14. mytoolman

    Just Me?

    This post is a bit of a rant..... In 2016 When I was building "Ethyl" *THE* Tool Truck (ETTT) I added an 8kw diesel generator to mostly power the A/C for showroom/display area/sales floor. It also can power the battery charger needed for the now dead SIX 6volt float batteries that are onboard...
Back
Top