North Forker
Latest activity Postings About Most reacted threads Most reacted posts
-
-
North Forker replied to the thread Dodged the bullet today ! Could of lost everything..That bugger looks suspiciously like at least two of the 20-25 year old power strips I have around. Mine aren't running anything but... -
-
It's worse than a drug addiction. I just call it prepaid electricity.
-
My ROI is never, even with net metering, but if the grid fails I have whole home backup power for infinity and beyond ;)
-
North Forker replied to the thread Does anyone use zketech a40L to top balance cells with?.Well I'm about a month late seeing your post. I'm working on my first DIY batteries using MB31's also. My BMS is a couple 48V JK...
-
-
North Forker reacted to Tiziano's post in the thread I WARNED YOU ALL! MB31/MB30 huge issue terminal snapping off with
Like.
I have 4 EVE MB31 from NKON with double screw terminals. NKON informed me before purchasing that the terminals were not original EVE... -
North Forker replied to the thread Mounting panels with unistrut.It's been a spell since your post but just wanted to say thank you. Your descriptions and closeup pictures helped me visualize what I'll...
-
North Forker reacted to OffGridInTheCity's post in the thread Mounting panels with unistrut with Like.
I did my ground mount with 2" galvanized pipe frame + 10ft long universal strut (beefier type) cross-members with bolted hold-downs...
-
I'm building a Unistrut DIY rooftop mount for my panels. I too strained and stressed over the different mount solutions, and I found...
-
See here: https://www.edgecs.com/documents/Unistrut/Unistrut_Solar_Instalation_Products.pdf
-
North Forker reacted to SomethingAppropriate's post in the thread Tewaycell 10kwh Sodium-Ion 48V with Built-in Inverter with Like.
Sodium cells get really low voltage on the low end of SOC. Like 1.8 or so, not sure. So you would need an inverter to work from...
-
With the emissions regs on Tier 4 engines and regulations on ultra-low sulfur diesel we have increased fuel pressure and took all...
-
North Forker reacted to BarracudaBob's post in the thread What's happening with Overkill Solar? with Like.
It's really cool they put a lot of work into it and I'd like to support them but I bought a 165 amp hour battery with Bluetooth on a...
-
Calling around I've heard stories of these easily going 25K hours so my unit probably saw some deferred maintenance. These diesels are...
-
I had good luck w/ Central Maine Diesel too! They had a "free shipping" promotion, and my old 15kw Generac (bought used) was no longer...
-
North Forker replied to the thread Central Maine Diesel Experience.I appreciate the feedback! We're working to install the rest of our full time off grid equipment this season and the permanent primary...
-
North Forker replied to the thread Central Maine Diesel Experience.It's great to hear a personal experience with a Perkins setup. I've got several quotes for Perkins powered gensets waiting on me to...
-
I thought i would share my experience with Central Maine Diesel when getting their Honda 10kw Propane generator with an autostart...
-
North Forker reacted to OneQuartLow's post in the thread need help, generator, 2 wire start with eg4 6000xp with Like.
I used a controller from Atkinson Electronics. They have models for many electric start generators to make them work with two-wire...
-
North Forker replied to the thread EG4 6000xp/Genmax 2-wire Generator.This product interests me as well. As a Chinese product with no engine longevity or electrical performance data, I'll look forward real...
-
-
Putting Prismatic cells on their sides is a TERRIBLE idea ! That has been talked about and beaten to death a 100 times and the dead...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
