Oldtimmer69

Please DM me your serial number for the inverter and station name and I will look into this.

I agree 100%

This is an unfortunate default setting from factory, should be LA. Would save them quite a few CS calls I think if it was changed.

Everything definitely isn't straight forward. I had 4-6500's before I switched to 2-18ks. These were easier to install but the dongles...

I think you're right. What a mess! The manual should explicitly state that, or even better there should be a setting for battery...

The post I've read where they had no communication, they used " lead acid" as the battery choice to get it to work. Then you set charge...

It's very frustrating, but it will be worth it once you get it connected. He'll help you out. Don't give up now👍

Make sure you have already registered prior to the following! From your phone or computer, use the Wi-Fi settings to locate the Wi-Fi...

With the 6000XP, this can be done on the APP. However, with the 18kPV, I would recommend reaching out to your distributor to have the...

@Oldtimmer69 yeah I can't get that far... the page never is reachable from any device.:rolleyes:

Here's how I did it, but you have to log onto the website. 10.10.10.1

Just to confirm, you were connected to the Wi-Fi that the dongle emits while attempting this?

Lol close only counts in horseshoes, and handgernades 🤣🤣🤣 Im glad it's working.. It sucks not seeing everything!

Ah yes that's it, I was close 🥴

This is what it says right now

Gilbert had me reset the dongle, that erased everything and it all had to be filled out again. This was the network settings I copied...

Jarrett sent me the settings to change and it started working. Too two days to get the parallel A to show up but now I can see...

Update. As a note after 15 months of operation my batteries have a cycle equivalent of 86 as reported by all 8 of my BMSs. January has...

Winter solstice is upon us. Still seeing gains from my array adjustments. 13kWh today and staying in double digits. Last year I...

My respacing of the panels is paying off. My highest production day in Nov last year was 18kWh. I've now had a 25kWh day. I do have more...