Most reacted posts
-
Post in thread: Easun 6048 charge controller not saving battery voltage settings - always going back to 12v
SCC Voc 180V PV Voc 39,4V per Panel (total for 3: 118,2V) Cheers- Reaction score: 1
-
Post in thread: Easun 6048 charge controller not saving battery voltage settings - always going back to 12v
Maybe the solar charge controller is damaged. Today it was sunny and it was connected to 3x280W Solar giving out 110V at the SCC. Connected to a 12V 200Ah GEL Battery. Set to AUTO but also switched back to 12V. The SCC was switching between the Mode 3 (night, not charging) and 4 (MPPT) with 0...- Reaction score: 0
-
Post in thread: Easun 6048 charge controller not saving battery voltage settings - always going back to 12v
Hi maybe somebody had the same problem and could help me. I have 2 Easun 6048 charge controller that where working fine before but now I can not save the battery voltage setting on them. All the other setting get changed but voltage goes always back to 12v and then I get the error that the...- Reaction score: 0
-
Post in thread: Easun 6048 charge controller not saving battery voltage settings - always going back to 12v
It is a 48V LiFePO4 DC System (3x Pylontech US5000 48V 4,8kwh] ... I have multiple other charge controller that charge the system and I am offgrid. The Easun 6048 did also run in this system before but I changed them with other charge controller and have not used the Easun 6048 for a bit. But...- Reaction score: 0