Most reacted posts
-
Post in thread: SRNE Error 20 over-temperature stuck
I have SPI-10K-UP (which is an OEM version of SRNE ASF48100U200-H) 10K split phase 120/120 inverter. Within the first few hours of use, while top charging my battery (which has 200 amp JK BMS) at 80 amps, the system cut off with an error 20 for over temperature and reads 120 deg C as the...- Reaction score: 1
-
Post in thread: SRNE Split Phase Hybrid Solar lnverter ASF Series 10Kw
Could you share how you integrated this inverter into Home Assistant?- Reaction score: 0
-
Post in thread: SRNE Split Phase Hybrid Solar lnverter ASF Series 10Kw
Bought two from Alibaba ( ASF48100U200-H 10K split phase). One for me and one for a friend. Mine failed with Error 30, over temperature, almost right away. Other one has not been installed yet. SRNE says it's the controller board since they had me checvk all the thermistors. I am still...- Reaction score: 0
-
Post in thread: JK Inverter BMS Android App keeps loosing password
I have a new Yixiang battery system with a JK-PB2A16S-20P 200 amp BMS. The Android App has some settings that the PC App does not have (specifically protocols higher than "010" for the RS485 port). The thing is that the Android App keeps loosing the password so I am unable to "verify PWD" in...- Reaction score: 0
-
Post in thread: JK-PB2A16S-20P BMS overloading at inverter startup
New 320Ah Yixiang battery system with JK-PB2A16S-20P BMS "Inverter BMS" Sometimes when starting the inverter, I get an immediate short circuit protection cut out. This is with no load connected to the inverter so I can only conclude that this must be caused by an inrush current to charge the...- Reaction score: 0
-
Post in thread: How often can I request modbus data on Deye inverter?
I have the same issue with an SRNE inverter but I already have baud_rate: 0 in my logger settings...- Reaction score: 0