Pierre's latest activity

Yes looks perfectly exact.

I just want to be clear that this is a clone to new folks and others who otherwise might not know the difference.

People can buy what they want. I honestly didn’t even read the brand label in the first post. It’s the buyers risk or reward in how...

Cool What kind of adapter did you use to connect the gas canister to the PV input?

Sounds like you have done well here ! Remember that adding a LOT of turns through the toroid can increase the capacitance from one side...

Interesting thread. Thanks guys!

A quick story of a recent experience I had. Not active on HF but had a terrible spur on a local GMRS repeater at 462.625 mhz. It went...

This noise I believe is a 15Khz sweeping freq and it comes from the MPPTs. It is not a "Cheap" inverter thing, it happens with Sol-Arks...

Getting high battery voltage is an indication of a unbalanced battery. Not untypical for a new setup. Often the default battery charging...

Yes

The first thing to understand is that wiring something to a ground rod is not the key part of safety. The key part is wiring all metal...

Late to the party, but here goes. Off grid for the last 11 years, 2 systems, both MPP solar inverters, 1 is my daily driver, 2 is my...

If you cannot wake the bms up , cut the casing open with an oscillating saw and I would replace the bms with an external one. JBD will...

Go Victron - you will thank me later.

i had to do that on the first JBD’s I bought about 4 years ago. The later ones circa 2023 are much more accurate without recalibration.

I only have one JBD BMS. It came as part of a pre-built 100AH battery I bought ..... so, those of you who have 5 or 6 or more of these...

Mine have spread out again, 1 at 63%, 2 at 64% and the other at 70%. All 4 batteries at 53.1 V and all cells are very close, 3.324 V...

Once low voltage protection had activated, say at 10.5 volts for a 12v system, the load is removed and the cell volts will increase...

Better to source lugs with smaller size holes.