Recent content by rabihhammoud

Use this password: 134679 This will open new settings so try change the PV algorithm (it has two options) Auto and static maybe!!!( I forgot) Also there you can change the graphics diagram and some other options. Conclusion, YES I swapped to Deye!!!Im very satisfied so far! Best regards.

Increase Bulk and Float 2 Volts Each (one unit) If you have two units in parallel or more, then forget! Its totally buggy! My advice, buy Deye inverter, its 100% stable, professional, and heavy duty! Best regards,

Hello all, Hope my post finds you well. Max solar sell, the Deye consider the Load and the feed into grid together as MAX solar sell! (load + Grid = Max solar sell) In my case, I have 2 Deye inverters 8K in Parallel, the grid MCB is 30 Amps, so sometimes its getting down because Deye is...

OK I managed communication by Serial to USB Will buy USB to RS485 Adapters because I need Deye Icloud at the same time Best regards. PS. Its a very friendly interface and live monitor! Thanks for your recommendation!

You are really kind and professional! Thank you!I finished the Raspberry side, connected to my interface and activate it...All is ready Now to be honest, got confused for communication cable! Solar assist said I have to buy like this one: https://www.waveshare.com/usb-to-rs485.htm While on the...

Hello again, I bought Respberry PI 3 B+ and already received it, also bought solar assist software but still waiting download link Now I want to make the USB to RS485 cable I searched online for pinout but got confused!!! I will make the Cable my self so kindly anyone can give the pinout for...

Last question, can the Raspberry PI connect two inverters @ same time? I have two 8K units in parallel! Hope to find a computer based software!!! best regards.

Thanks for prompt reply! The problem In this software, have to buy Raspberry Pi. I have old laptops so I can install one next to the inverter and monitor it from anywhere by Team viewer. Is there something for Deye same as Must, or Sorortech PC dependence? Best regards

Dear folks, I used to work with 2 brands before getting into Deye. For the Must inverters, they have very nice monitoring software on PC and same for the sorotech (watch power) Solarman and deye icloud are not live, they update on each 5 mins, or more.... In the Deye official website, I didnt...

Many school boys are around ?

Sometimes you find better answer from experience than talking to factory.... That is the forum prepose! Correct me if Im wrong! besides, the issue of charging is only in the OFF Grid mode ( I mentioned already that the inverter in the ON Grid mode is doing perfect job) The screenshot I showed...

Well, there is no need to insult anyone where you dont have any idea whom is speaking here or there!!!Even you dont know what qualifications I have or I dont!!! ;) Talking about inverters in general and specially configuration is something very simple!!! FYI, Kevin from sorotech entered and...

Thanks for reply... I dont have PV high voltage warning! Also when PV is in load, the voltage is 350 or sometimes 340 Besides, ON Grid mode, all is working perfect The issue is that inverter not loading PV to charge EMPTY batteries in the OFF grid mode Best regards.

Dear folks, Hope my post finds you well. Hope someone share me his experience with the buggy Revo II inverter. I have around 50 inverters installed in diff sites. Inverter settings: Off Grid Mode (Even no utility) Work mode: AC - PV Charge settings on PV is 90 Amps , while on AC is set to 60...

Dear folks, Hope my post finds you well. Actually I have around 21 units of Revo II 5.5 units All these units cant been seen by Wifi (SmartESS) Have another 10 units of 3.2, all are working like a charm If you contact the sorotech, they are girls whom they know nothing in support.... I...