rilonau's latest activity

Hi guys, i have read so many different numbers on current consumption of the JK BMS that i am confused now:unsure: Could someone...

How much would the protrude? Keep in mind the extra windforce if it can easiliy catch up under the panels! I am not a static expert, but...

What about the fan noise with the Xijia and FCHAO inverters? When (at which load) do they kick in and would you hear them - say from 5 m...

I have a 12v Xijia (CNSPOWER) 1500w inverter, and recently a 24v 1800w FCHAO inverter. Both are used in DIY solar generators. Both...

Thank you for your experience. Yes, i know especially the chinese brands tend to overrate their products sometimes by 50% or even 100%...

I would spend more. I watched a YouTube video of inverters catching fire. I have a Victron 1200 VA phoenix, and that barely meets your...

No problem at all. I have a little test system with a 50 and a 130Wp panel (in parallel) - even they have slightly different Voc and...

2x SMA Sunny Island's (48 volt)@ 6kW each, (12kW total) -120/240 split phase. Standby 4 watts each (8 watts total) (Exactly on...

Hi all, i need an inverter for 24VDC to 230 VAC 50 Hz. It should be able to deliver 1000W cont. and maybe 1500W peak. It sould have a...

Honestly i have more trust in my own diy batteries than in the system batteries from some doubtable producers. Sure, you will never 100%...

I would go for a complete diy battery with LFP prismatic cells from china. They come very cheap nowadays and you get 105 Ah cells for...

You're going to need some serious current to keep this battery healthy something on the order of 80 - 100 amps. Do you have a forklift...

Look up the surge current your saw draws! Big motors can draw an immense surge current for starting due to induction! Is it a 3phase...

Never heard of JDB BMS. What about JK? Imho the simpler the more stable and reliable. Software can be faulty (there was recently a...

Overkill bms is a good choice with a fantastic warranty

I strongly recommend one with software and programmable features. How about: (try to disregard that they cannot spell LiFePO4)...

Hello, i want to build my first LFP battery (for testing purposes) and want to equip it with a rather simple BMS for protection (deep...

Sounds really good and i would be interested. I could probably not contribute really much, but maybe some ideas. I have some basic...

I've got decades of power electronics experience, including power inverters, battery chargers, and BMS's. Let me know if you or anyone...

Yes, thanks. Most consumers are single phase (230 VAC), only the oven in the kitchen uses all 3 phases (and can be run on grid only)...