sergea's latest activity

I'll will send you that tomorrow. PM me

But sure you understand the rules and update you post accordingly ;-)

Hello Alvin welcome, be sure to comply with the "New vendor rule" if you don"t want to be kick out ;-) ...

you may need to contact the author if you are not familiar with building and flashing on STM32 platform.

External switch OFF When at the standby status, the BMS can be powered on/off through external switches. basically you can...

many people are doing the same mistake. CANBUS is a interface, not a protocol. jkmbs has a specific CAN protocol not supported by...

- you have to triple check your balance cable. (have someone else to check it also) - did you have any picture - did you check cells...

M5

it can be set up, up to 5 sec

seplos BMS doen't support both CAN & RS485 only one of them depending of which version you order. don't try to upload RS485 firmware on...

hahahaha

To my friend I say, stay away from voltronic base inverter. you can't trust a product coming with 1 yr warranty. if you do your...

you can buy them in EU for a good price at solarpower24.

I would never replace it with a voltronic base inverter, a DEYE hybride sound a lot more appropriate. ;-)

Yep All answers are in the thread. To make a long story short, Amy was supposed to make the box, after some delay, she said "why not...

Ok I see, makes sense.

I always rate my busbar at least x2 my charge/discharge inverter capacity. if you expect all 4 inverter to charge/discharge at max...

Do not hesitate to give us feedback on your purchase and test experience. I can tell you that it's complicated to get your money back...

BTW A new box format for 185Ah blade style cell is coming. The thing is EVE,CATL, and CALB probably don't have this type of cell on...